Learn the FUNDAMENTALS of Using Rubber Stamps....Paper....and...Ink to create UNIQUE CARDS, GIFT ITEMS and MINI PHOTO ALBUMS

Sunday, December 29, 2013

"Follow My Heart" Project 3


We'll I'm back again with Project 3..it's
all tied together with the SweetHeart Treat Bag

These little SweetHeart Treat bags are so cute with the little white hearts and they are so durable too. The top of the bag already has a die cut zig zag edge so that saves you an extra step of time of design detail. With this bag having a finished size of 4 1/4" x 3 1/2" you can easily fit a couple of pieces of chocolate inside as well as a gift card. You know your favorite Valentine will love that.


The bag is folded down 1" from the zig zag edge. Glue one of the die cut striped banners from the Sweetheart Treat Bags kit just underneath the folded down portion.

Ink up and stamp in Real Red on white card stock the cute little xoxo key image from the FOLLOW MY HEART stamp set. Trim with Paper Snips around the image and glue to the banner.

Ink up and stamp in Bermuda Bay on white card stock the POST CARD portion of the stamp and trim to fit across the top of the 3 1/2" bag. Glue down. 

Measure the holes for your Pool Party Bakers Twine (included in the Treat Bag Kit). Mark with a pencil 1 1/2" from either side of the bag. I used a 1/16" hole punch but a piercing tool will work also.

Fill your bag and then Cut 10" of the Bakers Twine. Thread the twine through the holes and tie in front. Place a GLUE DOT on the tie ends.

Punch 4 SMALL HEARTS in Bermuda Bay card stock. Attach 2 hearts back to back over the GLUE DOT on each tie end. Apply a Rhinestone to each heart.

ADORABLE don't you think? , I wish I could give you ALL one!

If you want to make this and ALL of my 6 Valentine Projects you
can find the items in MY ONLINE STORE HERE.

the Supply list for ALL 6 PROJECTS 
can be found HERE at Project 2


Follow My Heart Clear-mount Stamp Set  Sweetheart Treat Bags

FYI & Just a Reminder there are only a few days left to take advantage of the
fabulous products in the Holiday Catalog found HERE .


Saturday, December 28, 2013

"Follow My Heart" Project 2


I'm back with another project using the 
"FOLLOW MY HEART"
stamp set
(only available for a limited time)
this is Valentine Project #2

Follow My Heart Clear-mount Stamp Set

I will also be incorporating the 
"POST CARD" 
stamp set as well in the other upcoming projects.
It's virtually a blank canvas for you to decorate as you like..
Post Card
( tip: because the Post Card stamp is so large I highly
recommend you get it in wood if you do not already 
have a clear block that size)

Did you notice the super cute white hearts on my red hearts?
It is the paper that the Sweetheart Treat Bags are made of.
Simple cut down the side of one of the bags to have Sweet
Valentine paper for all my projects.

Sweetheart Treat Bags
I will be using a collection of supplies for ALL 6 Projects and
I'm sharing the list of things you will need.
Supplies for Projects 1-6 Include....

Stamps      Follow My Heart #134611 wood, #134614 clear mount
                Post Card          #130366 wood, #130369 clear mount

Paper        SweetHeart Treat Bags #134610
                  (includes 12 bags, banners and bakers twine)
                Whisper White # 100730
                Pool Party #122924
                Bermuda Bay #131197

Ink           Bermuda Bay #131171
               Real Red Marker#100052

Punches    Full Heart #119883
               Small Heart #117193
               Word Window #119857
               Piercing Tool & Mat or 1/16" Circle(retired

Other       Rhinestone Basics #119246
              Glue Dots #103683
              Dimensionals #104430
              Paper Snips #103579


1.  Make a Pool Party card base.
2.  Stamp the Post Card image with Bermuda Bay ink on white card stock, 
     trim outside edges to 1/8".
3.  Stamp the Eiffel Tower image in Bermuda Bay ink.
4.  Punch a Full Heart using Bermuda Bay card stock and the paper from
     the SweetHeart Treat Bag kit.
5.  Using a red marker , ink up just the portion of the sentiment and 
     stamp on white card stock.
6.  Punch out sentiment using the Word Window punch. Pop up 
     the sentiment with dimensionals.
7.  Using the Small Heart punch, punch 3 red patterned hearts and 2
     Bermuda Bay hearts.
8.  Apply a Rhinestone to each of the 2 Bermuda Bay Hearts.

So Bright and Crisp , ready to give to a Favorite Valentine!

Thank You for joining me today and I encourage you to 
return tomorrow for Project #3

You can subscribe by email so you know when I've posted
the next project in this series
   

Friday, December 27, 2013

"Follow My Heart" Project 1


I've been having so much fun putting some projects 
together to share with you using
the Follow My Heart stamp set 

If you follow me here, you know how I love to S T RE T C H
my Stampin'Up products by using them in other ways.

I love the Sweet Heart Bags...yep 12 little adorable heart sacks
ready to stuff, but you know how to do that. Need new ideas?

I have 6 total projects to show you, ALL using the same products.
2 Decorated Treat Bags and 4 Lovely Cards

Today is Project No. 1 and follows the Sketch Challenge at 
Create with Connie and Mary

CCMC283
If you have Stampin'Up products you can play along with the challenge 
or see what the Designers have done HERE

1.  Cut and score a Pool Party card base.
2.  Cut a Whisper White panel 4" x 3 1/4"
3.  Cut a red heart layer from one of the sides of the 
     SweetHeart Treat Bags 3 1/2" x 2 3/4".

Sweetheart Treat Bags

4.  Wrap the card base twice with a piece of Pool Party bakers twine 
     included in the Kit.
5.  Cut 1 of the striped Banners in the kit in half long ways or 
     straight down the middle. With the left over half punch 2 striped 
     Small Hearts.
6.  Using the Full Heart Punch, punch 1 Bermuda Bay and 
     1 Pool Party heart. 
7.  Dry Emboss the Pool Party heart with the Dotted embossing folder.
8.  Stamp the sentiment from the Follow My Heart set in
     Bermuda Bay ink on whisper White card stock.
9.  Punch out the sentiment with the Word Window Punch.
10.Pop up the hearts with Dimensionals and sparkle up 
     with Rhinestone Basics.
  



If you haven't already, Be sure and subscribe my email 
on the upper left hand side bar
so that you don't miss seeing ....

ALL 6 " FOLLOW MY HEART " Valentine Projects

Follow My Heart Clear-mount Stamp Set


Sunday, December 22, 2013

Festive Flurry Treat Tags



Christmas time is for sharing and baking and laughter and more.

I confess that Cooking is not my favorite thing but I thoroughly enjoy baking, especially at Christmas time. I would be just fine if there were no gift giving as we all have way too many things ( stamping supplies are not included in that statement  though...LOL ). Somehow the artistic side of me just has to create yummies and decorate cookies to share with others.

The Crew over at the SUO Challenges asked us to show you our LAST MINUTE gifts as we count down the days. I knew just what I wanted to do since I had just received a call about a last minute " can you guys come over on Friday night?" Lucky I had just about finished up my baking + 4 cookie sheets of English toffee and 2 trays of Pretzel Turtles. 




For what ever reason ( tis the season to have NO REASON ) I wanted my tag to have a neutral tone to match the contents, so I went with a Crumb Cake base, Champagne Glimmer paper and Whisper White. Of course I used the Festive Flurry die cuts and ran the white layer through the Polka Dot embossing folder. The Merry Christmas sentiment is from Petite Pairs and die cut using the Itty Bitty Banners die.


After the Gusset Cello Bags where packed I cut about 22" of Cherry Cobbler Tulle and tied a bow around the top of the bag. The Festive Tag was attached to the bag with linen thread to match the overall feel of the color palette . I ended up making 7 treat bags and received BIG smiles and "oh my gosh" from our wonderful friends. 


Plus I wanted to share the frosted cookies I made and sent through the mail to my 80 & 90 year old relatives....I'm sure they will enjoy them, it fills my heart with joy!



Thank you for visiting,

A VERY MERRY CHRISTMAS to YOU....Pam

Friday, December 20, 2013

Stampin'Up Flirty Dress Up Skirt


It's Dress Up Cupcake Style!
It's such a Happy Dress and seemed to fit perfectly 
with the sentiment from Yippee Skippee!

A couple of months ago I had my Stamp Club make
this cute Birthday card inspired from an idea I saw on Pinterest.
They had so much fun finding a new way to use the Dress Up Die!

The Skirt is made from a Wilton cupcake liner that has kind of
a zebra print. I thought the bold black and white would look
good with some brights so we used 
Tempting Turquoise and Melon Mambo.

I cut a line from the outside edge of the cupcake to the center and then folded it over on itself to make a half circle, then again to make a quarter circle. Next I cut a small circle off of the tip so that when unfolded the liner has a hole in the center. Using sticky strip at the waist you can attach the paper liner with little tucks as you mold it around the waist. I started with attaching the center of the liner with the center of the waist and then folded from the center out on either side. I actually tucked about 1/4" around to the back side of the dress.


If you want to jazz up the dress add a strip of  Silver glimmer paper to the waistline. You can make the sheer little shrug with vellum card stock and run it through just the top half of the Dress Up die. Cut that piece down the middle and dry emboss it with the Perfect Polka Dots embossing fold (my personal favorite)!

Pop up the dress with dimensionals on a Scallop Circle Bigz that has been stamped in black with the sentiment from the Yippee Skippee stamp set.

Yippee-Skippee!

   Looking for more Yippee Skippee inspiration? Try these


Thursday, December 19, 2013

Ho Ho Ho, Tags 4 You


It's HOLLY JOLLY  transformation time!
Here's a FUN way to S T R E T C H this Jolly sentiment.
Why use the whole word when you can use just part of it?
Just ink up the "ho" part 3 times with 
on white card stock 
and then trim close to the letters. 
Mount those on a Cherry Cobbler 3/4" circle 
and then onto a 1" Gumball Green circle.

Don't forget the SPARKLE with a strip of 
Silver Glimmer Paper 
and a few Basic Rhinestones!

Use a Whisper White card base
Make Panel sizes...
Gumball Green      5" x 3 3/4"
Cherry Cobbler      1 1/2" x 1", 1 1/2" x 3/4"
        Polka Dot      3 3/4" x 3/4" , 4" x 2"
        Stripe           2" x 1 1/2"
                           4" x 1/2"

Use can see more Season of Style and Tags 4 You 
Christmas projects HERE

Wednesday, December 18, 2013

Tags 4 You 15 Min. Christmas Card



Quick and Easy and in Just 15 Mins.
Yes it's more inspiration using the SEASONS of Style DSP!

You will need....

1.   Make a Crumb Cake card base that is cut 8 1/2" x 5 1/2" ,score @ 4 1/4" 
      on the long side, fold in half to a finished size of 5 1/2" x 4 1/4".
2.   Cut a Gumball Green layer 5" x 3 3/4"
3.   Cut from the Seasons of Style Designer Pack a Polka Dot panel
      measuring 3 1/2" x 3"
4.   Cut a Striped layer measuring 3 1/2 x 1 3/4"
5.   Apply patterned paper to the Gumball Green layer.
6.   Cut a piece of Silver Glimmer paper measuring 3 1/2" x 1/2" and glue over
      the seam of the patterned papers.
7.   Pop up the Gumball Green panel with dimensionals and apply to the
      Crumb Cake card base.
8.   Punch a Cherry Cobbler layer with the Decorative Label Punch.
9.   Stamp "Holly Jolly" from the Tags 4 You stamp set in 
      Gumball Green ink on white card stock and Punch with the Label Bracket.
10. Attach the Holly Jolly to the Cherry Cobbler layer and then pop up with
      dimensionals over the glitter strip.

So EASY and festive and it uses some of the same materials in these previous projects of mine..................



  


There is still time to make a few Christmas Projects while this 
Seasons of Style Designer paper is still available. 

Better yet have it for next year and copy 
the projects I have already done!


Come back tomorrow for one more 
Season of Style Project
and here's a sneak peek of Friday's Project







Tuesday, December 17, 2013

Punch Art Wreath & Season of Style DSP



Here's a card I wanted to share from my November stamp club. 
I just love the touches of ribbon and sparkle!
It's pretty hard to resist the versatility of the Season of Style Designer pack
I love having the never ending 48 sheets of fun!

The card base is Crumb Cake and is stamped with White craft ink.
It looks like snowflakes but it's really an image from the
HAPPY DAY stamp set 


Happy Day


Cut a Cherry Cobbler layer 5 1/2" x 1 3/4".
Cut a Polka Dot layer 5 1/2" x 1 1/2".
Cut 5 1/2" of Brown Sugar Ruffle Trim and apply with sticky strip to the under 
   side of the Cherry Cobbler layer before applying to the card base.
Cut 2 Gumball Green squares 2 1/4" x 2 1/4" .
Using a 1" Circle punch and punch holes in the center of the 2 squares.
Punch a 1 3/4" Scallop Circle over the top of the 1" circles to create the 
   wreaths.
Place dimensionals between the 2 wreaths lining up the scallops. Apply to the 
   polka dot layer.
Punch 1/4" dots using Champagne GLIMMER paper and glue into place.
   ( the Champagne Glimmer coordinates with the Brown Sugar Trim so 
      beautifully).
Attach a Cherry Cobbler Seam Binding bow to the wreath.


Stamp the sentiment from the Very Merry Tags set in Cherry Cobbler ink on 
    white card stock. Punch out the sentiment with the Petite Curly Label punch 
    and apply to a 1" Cherry Cobbler base. Pop up the base with dimensionals.

So Much fun in one little card...enjoy making your own and put a Smile on
   someone's Christmas Season!  Pam


Sunday, December 15, 2013

Tags 4 You Quick and Easy Ornament Card




Are You Still Making Christmas Cards?
I know that mine aren't completely done yet!  aaarghhh
So here is a QUICK CARD to help us out .....
It's Easy to make with a few punches and some designer paper.

Pop up a Gumball Green panel measuring 5" x 3 3/4" on a whisper white  card base. Punch 1" Circles from the Season of Style Designer Series Paper Stack. Cut 3/8" strips of Silver Glimmer Paper  1 3/4", 1", 2", 1 1/8" & 2 1/8" long. Each circle should be glued slightly over the end of each sparkly strip. Stamp in Gumball Green on white card stock the Holly Jolly sentiment from the Tags 4 You set. Punch out with the Label Bracket punch and pop up using dimensionals. Finish your card by attaching a Silver Ribbon bow and Basic Rhinestones on the O O's.


 Season Of Style Designer Series Paper Stack  Tags 4 You Clear-Mount Bundle  Silver 1/8 Ribbon

SweetHeart Treat Bag does the Technique Twist


I'm S T R E T C H ing the Way to use my newest 
Sweetheart Treat Bags in preparation for Valentines Day.

It's all a part of this week's

FAUX TILE

Grab the Badge!

Come try out the Faux Tile Challenge and 
If you can through a twist in it all the better!

Here's what I did......

1. Make a Coastal Cabana card base.
2. Cut off the front half of a Sweetheart Treat Bag and cut it down to 
    4 5/8 x 3 3/8.
Sweetheart Treat Bags
3. Silver Emboss the sentiment 3 times down the center of the paper.
4. Now offset the left hand portion of the sentiment in between the previously  
    center stamped sentiment. Do this on the right side of the paper.
5. Now offset the right hand portion of the sentiment in between the center
    sentiment on the left side of the paper. 
6. Versamark the whole paper and clear emboss with a heat gun.
7. Cut 1" off the right side of the paper and repeat on the left side.
8. Cut each of the 3 strips at 1" at each end.
9. Glue and re-essemble the strips and square on a 4 1/4" x 5 1/2" white piece 
    of card stock. Leave a small space of white showing in between the squares.
10.Now you can cut down the larger white outside edges to match YOUR tile 
    widths.
11.Glue to card base.
12. Use the cute little striped banner in the Sweetheart Treat Bag kit and place 
      it over a piece of Coastal Cabana card stock .Trace and cut the shape of 
      the striped banner making it just 1/2" longer.
13. Stamp the key image with Real Red ink on white and punch with a 1" 
      square. Mount it to a Real Red layer made with the Postage Punch. Pop up 
      with dimensionals.
Follow My Heart Clear-mount Stamp Set

14. Fold 1 of the Bakers Twine pieces included in the kit in half and tie around 
     the card base with a bow in the front.

Thanks for joining me today and Merry Christmas!

Tuesday, December 10, 2013

80% off Clearance Rack Blitz with Samples

Clearance Rack Blitz. Products up to 80% off! Don't miss out. Only available while supplies last.

From  Christmas Designer Papers to Punches and Die Cuts now is a great time
to take advantage of the NEWLY RELEASED ITEMS....
only while supplies last though!


Here are a few of my favorites Christmas items
just released!

Be of Good Cheer Designer Series Paper  Candlelight Christmas Specialty Designer Series Paper  Festival of Prints Designer Series Paper Stack

Snow Festival Designer Series Paper  Mitten Builder Punch Joyous Celebrations Clear-Mount Stamp Set

Holiday Collection Framelits Dies  Ornament Punch - by Stampin' Up!  Holiday Stocking Bigz L Die - by Stampin' Up!


and here is a little inspiration using some of the newest
CLEARANCE RACK items!
view details for each of the projects by clicking on the photos

    



   

More Christmas Inspiration here

Ho Ho Ho, let it SNOW our first snow of the season.
It's so pretty and we don't get it often so I'm thinking of ALL
of You who have had to bear it out during this huge COLD spell.

Photo

One of my Babies really knows how to stay warm



I hope you are too! It was 29 degrees here this morning 
in the foothills above Sacramento..
what are the temps where you are?



Related Posts Plugin for WordPress, Blogger...